Facet 480532 Solid State Electronic Fuel Pump (Cylindrical 12V)

Facet 480532 Solid State Electronic 12V Fuel Pump (Cylindrical)

The Facet-Purolator (Cylindrical) Solid State Electronic Fuel Pump is designed to replace the original fuel pump on carburetor-equipped cars, trucks, agricultural equipment, marine equipment and generators. The solid-state design provides greater reliability, longer life, easy installation, the solid -state design also prevents heat related vapor lock and cold start problems. When installed correctly the pump will provide a consistent, steady fuel supply in any conditions.

Compatibility:

• Petrol
• Diesel
• Biodiesel
• E85
• Blended alcohol fuels
• Fuel additives

Available Features:

• 12 - 24 inches dry lift
• 20 - 45 GPH
• 2.5 - 8 PSI
• Transient Protection-24 volt only
• State of the art Electronics
• Sealed Electronics
• Built in Anti-Siphon Valve (Positive shut-off
• Complies to Mil-std-461D
• Replaceable 74 micron filter
• Built in magnet to collect metal particles for additional filtration
• 1.6 amp average
• Self Priming and Self Regulating
• 32 ounces and 5 inches
• Corrosion Resistant over 100 hours of salt spray
• Operating Temperature Range: -40F to 180F

Specification:

• Part Number: 48053E
• Kit Number:
• Type: Gold-Flo
• Volts: 12
• Max/Min: 8.0 - 6.0
• GPH: 45
• Positive Lead: n/a
• Negative Lead: n/a
• Fuel Filter Fitting: 1/4 - 18 NPTF
• Lift Min: 24"
• Check Valve: N
• Positive Shut Off Valve: N
• Internal Fuel Filter: 400U
• Stainless Steel: N

Reliability: The new GOLD-FLO® Solid State Fuel Pump is an enhanced version of our Interrupter model. It has Solid State circuitry and will meet or exceed all performance specifications and is totally interchangeable. (These pumps have demonstrated an endurance life almost double that of the nearest competitor, according to our test data).

Easy to Install-Easy to Service: Two bolt mounting makes installations easy. Nothing to adjust. For best results, mount the pump close to the fuel tank and below the fuel level. The pump is self-priming to 24 inches vertical fuel lift. Vertical mounting is preferred to assure maintenance of rated pressures. An installation kit is available for replacement applications. The only service normally required is a simple cleaning of the filter and fuel inlet cavity.

Eliminates Vapor Lock: When properly installed on most vehicles a constant, smooth, dependable supply of fuel under pressure is assured in the hottest weather or in high altitudes.

Dimensions (inches):

Please Download Dimensions: